Features :

Neutral silicone sealant (alcohol/alkoxy) with fungistatic effect (mold protection) - Special sanitary grade - Can be used on most substrates

• Elastic seal around sanitary fixtures: washbasins, basins, shower trays and enclosures, bathtubs, sinks, bathroom furniture, worktops, melamine furniture.
• Can be applied to glass, enamel, porcelain, acrylic, synthetic materials and resins, wood, concrete, stainless steel, natural stone*, etc.... (*) The diversity of types, particularly for marble and granite, requires a preliminary test on a hidden part].
• The presence of effective fungicide prevents the development of these black spots that give the joint a dirty appearance.

Application :

Preparation:

• Surfaces must be dry, free of dust and grease.

Instructions for use:

• For joints that are too deep, limit depth with cellular foam. In general, joint depth
• should be less than half its width (non-through).
• Cut the end of the nozzle to a diameter slightly smaller than that of the joint, then apply the product.
• Smooth with a GEB joint smoother within 5 minutes at the latest.
• Do not apply the sealant if the temperature is below +5°C or above +40°C.

Consumption :

• Depending on joint dimensions and application, a 310 ml cartridge will produce a joint of one length (joint length is expressed in meters)

Cleaning of equipment :

• Equipment is cleaned with acetone, white spirit or ethyl alcohol before the putty dries and by scraping after hardening.

Product benefits :

• Multi-purpose
• No rinsing or drying

Tips :

• • Delimit the joint location beforehand by applying adhesive tape, which can be removed immediately after smoothing.

Storage :

• Store at temperatures between +5°C and +25°C.
• The expiry date noted on the packaging is measured on unopened product, stored at 20°C under normal hygrometric conditions.

Remarks :

• Mastic cannot be painted.
• For use on natural stone (marble, granite, etc.), it is advisable to carry out a preliminary test on a hidden area.
• Prolonged storage at higher temperatures may, in certain cases, alter the final characteristics of the product.