• 100 g tube
• 100% silicone for flat joints, technical stability 250°.

Functionality:

Elastomer high performance, single component, 100% of silicone, acetic type, cross-links with air humidity, flexible and resistant. Does not contain solvents :

• Replaces preformed cork, felt, paper, rubber...
• In-situ formed gaskets for gearboxes, compressors, electric motors, pumps, inspection hatches.
• Seals for lighting devices.
• Bonding of metal parts to the windscreen.
• Sealing of electrical cable passages.

Implementation:

Preparation:

• The joint surfaces must be clean, grease-free and dry.
• The rubber seals will be scraped with sandpaper and then cleaned with a solvent such as acetone.

Instructions for use :

• • Apply the sealant evenly to the prepared surfaces.
  • When applying between two surfaces, place the parts in contact with each other with just the right amount of pressure sufficient to expel the air without pushing the filler away.
  • Then let the whole thing rest for at least 24 hours, depending on the geometry of the joint.

Consumption :

• The excess of not hardened putty can be removed with acetone preferably, or failing that with alcohol ethyl alcohol or white spirit.
• If the excess filler is reticulated, it can only be removed mechanically, using a scraper "cutter. Then to facilitate cleaning, soak the part in the solvent previously used.

Cleaning of equipment :

• Before curing, clean tools with solvent (ethyl acetate or ketone solvent).

Tips :

• In cold weather (below +15 °C), the curing speed slows down considerably, so we recommend that you We therefore recommend working at temperatures above +15°C (environment and substrate to be repaired). In case of If necessary, increase the dose of hardener (3 to 4% instead of 2%) without exceeding this limit.
• Indeed, an excess of hardener reduces the mechanical characteristics of the product.

Storage:

• • Store at a temperature between +2°C and +30°C.
  • At 20°C and protected from humidity, the shelf life of the product in its closed original packaging is 24 months. month.
    

Product benefits :

• Flexible and resistant, does not contain solvents
• Excellent resistance to weather, vibration, moisture and ozone
• Good chemical stability to dilute acids and bases
• Can be used in contact with coolants, oils and temporarily in contact with fuels