Application:

G10 INHIBITOR is an anti-corrosion and anti-scaling product designed to protect closed central heating circuits filled with non-softened water. It can be used to protect a new installation or after the de-silting treatment of an existing installation.

Product benefits :

Can be applied to a new installation or after de-silting an existing one - Protects against corrosion, prevents sludge formation and eliminates boiler noise - Suitable for all metals (steel, copper, brass, cast iron, aluminium) as well as for plastic pipes used in underfloor heating systems (PER, PEX, PB, PP, PVC) - Contains a biocide that prevents bacterial contamination - Compatible with the other products in the GEB HVAC range.

Technical Features :

Orange liquid
Aromatic Odor
Compatible with most hardware.
Does not damage radiator and boiler nipple seals

List of components :

"Use biocides with care. Read the label and product information before use.

Instructions for use :

- Turn off the boiler.
- Drain the system by a few litres.
- Fill the heating circuit by incorporating the G10 INHIBITOR at the level of the drain head of a radiator, in the upper part of the installation. The dose is 1 litre for a 100 litre installation.
- Pressurize the system and then turn on the circulation pump for at least 30 minutes to homogenize the solution. Leave the product in the system, do not drain.
- In the event of a major water top-up, it is imperative to add G10 INHIBITOR in order to restore the 1%.
- Product lifetime: 5 years.

Advice from the Pro:

To know the exact volume of your installation, think of taking these readings:
- Before the first filling of a new installation or following a de-silting, take the water meter reading (V1)
- Performing the filling
- Water meter reading (V2)
The volume of your installation is obtained by the difference Ve = V2 - V1