Carton of 12 PRO FOAM polyurethane expanding foams, PU manual, 700 ml SOUDAL reference 12035112P.

Product description:

Pro Foam is a single-component, self-expanding polyurethane foam for upside-down use.

The foam contains gases (HCFC- and CFC-free), which do not harm the ozone layer.

Characteristics :

- High shape stability (no shrinkage or post-expansion)

- High filling efficiency

- Excellent adhesion to all substrates, except PE/PP

- Excellent thermal and acoustic insulation

- Excellent assembly properties

- Freon-free (harmless to the ozone layer and the greenhouse effect)

- Not UV-resistant

Applications :

- Window and door installation.

- Cavity filling

- Installation and repair of ridge tiles

- Application of low-noise coatings

- Optimizing insulation in the refrigeration sector.

Shelf life :

12 months in closed packaging in a cool, dry place (Between 5 and 25°C), Always store upright.

Instructions for use :

Shake can vigorously for 20 seconds.

Screw adapter onto aerosol. Moisten dust- and grease-free surface. For unusual substrates, an adhesion test is recommended.

Fill the joint or cavity 1/3 full, as the foam continues to expand during curing.

Stir regularly during use.

If several coats are applied, moisten between coats. Uncured foam can be removed with cleaner or acetone.

Before using cleaner, check surfaces for damage. Plastics and coats of lacquer or paint can be particularly sensitive to this.

Hardened foam can only be removed mechanically, with Soudal PU-remover

Lightly moistening the substrate optimizes adhesion, increases yield and accelerates curing. To fill large volumes: apply the foam in layers and moisten between each layer. For unusual substrates, a preliminary adhesion test is recommended