Repair of enamelled materials: 2 tubes of 20 g

Features :

Two-component epoxy paste for the repair of micro-leaks and sanitary facilities chipped or broken :

• Bathtubs, sinks...
• Suitable for most materials (porcelain, earthenware, enamel, metals, copper, PVC, synthetic materials)

Implementation:

Preparation:

• Sand with fine sandpaper and clean the parts to be repaired. Degrease if necessary.
• Mix the resin and hardener in equal amounts until a homogeneous mixture is obtained.
• The resulting mixture can be used for about 15 minutes.

Instructions for use :

• Apply the product with a spatula, smooth and leave to harden for 6 hours without touching. In the case of a If you want to glue the part to be glued, ensure that it is held in place with adhesive tape.
• The maximum characteristics will be obtained after 24 hours.
• After a minimum of 6 hours, finish the surface. If necessary, smooth out any unevenness with a special abrasive paper. water (bodywork type) very fine grain.

Cleaning of equipment :

• Acetone or ethyl acetate (before drying the product)

Storage:

Tip:

Technical specifications :