Product containing a substance at a concentration authorized for sale to the general public by regulation (EU/2019/1148).

Area of application:

allows the unblocking of toilets and waste water pipes.

Usage:

The doses to be used depend on the type of installation and the importance of the problem: as a general rule, the following quantities can be considered

1 W.C. :

Difficult to drain: 1/2 Litre | Clogging: 1 Litre | Maintenance: 1/4 Litre per month

Pour the productIf possible at the end of the day (lock the toilet, wait one night before flushing several times). If the toilet is connected to a septic tank, it is advisable to reseed the tank two days after unclogging.

2 URINOIR:

Difficulty in draining: 1/4 Litre | Clogging 1/2 Litre | Maintenance: 1/4 Litre per month

Proceed like the toilet.

3 SINK-BIDET :

Difficulty in draining: 1/10th of a Litre | Clogging: 1/4 of a Litre | Maintenance: 1/10th of a Litre per month. Carefully pour the product into the drain and leave for 2 to 3 hours. Rinse thoroughly with cold water. Avoid contact of the product on stainless steel and synthetic resin sinks.

4 SUMP - SEWER :

Depending on the size of the bottle and the degree of blockage, it will be necessary to pour 1/2 bottle of product in the blocked drain for 2 to 3 days if necessary. An abundant rinsing will finish the operation when the flow is normal.

The MITTENAERE SERVICE consumer unblocker Being mainly based on inorganic acids, it is corrosive and can cause severe burns. Wear gloves and goggles.

- Handle with care and avoid splashing in the eyes, on the skin or on clothing (rinse with cold water in case of contact). Wear gloves and goggles.

- Never mix with other products (bleach, caustic soda, detergents...).

- Close the bottle carefully and keep it under lock and key.

The unblocker for the general public MITTENAERE SERVICE is safe for lead, PVC, porcelain. Do not use on light metals, stainless steel, enamel, chrome, white PVC and acrylic siphon and synthetic resin, copper. Do not use in grinders. Product may generate heat when in contact with water. If flow is difficult, pour the consumer unblocker and run cold water over the faucets. It may be necessary to leave the product on for several hours.