Anti red algae, preventive and curative treatment, 5 L canister

Anti red algae, preventive and curative treatment, 5 L can Onyx Bricolage reference E19050503AR.

Onyx Anti-Red Algae is ideal for preventive and curative treatment of red algae. Does not attack or stain treated surfaces. Anti-microbial product.

Onyx Anti Red Algae is a preventive and curative treatment specifically formulated against red algae.

Leaving no trace, it is ideal for treating surfaces such as roofs, walls, facades, terraces, balconies, outdoor staircases, paving and other outdoor installations...

Compatible with building materials such as stone, brick, slate, mortar, concrete, asbestos cement, plaster, painted substrates..

Ready-to-use product for outdoor use in dry weather.

Long-lasting preventive effect to prevent or delay the return of red algae.

Coverage: up to 5 m2/L.

Anti-microbial product.

Use: Anti-Wrinkle / Clean / Protect

Surfaces: Wood / Multi-surface / Metal / Floor

Packaging : 5 L

Texture : Liquid

OUR TIPS

Use anti-microbial products with care. Read the label and product information before use.

Product is ready to use.
Application temperature: 10 to 40°C, product efficacy is reduced at extreme temperatures.
Ensure dry weather to allow product to act for a minimum of 6 hours.
Apply with a sprayer or brush to contaminated surface until saturated.
Allow to act until red algae are completely dry (may take several days), then remove residues with a high-pressure cleaner.
Repeat operation if necessary.

For preventive action:
Apply ONYX Professionnel red algae remover to the surface to be treated, do not rinse.

Tool cleaning:
Use water directly after application.

In all cases, carry out a preliminary test on an inconspicuous area to check compatibility with the substrate.
Do not dispose of residues down the drain or in the natural environment. Do not reuse empty packaging.
Avoid spraying on plants to be preserved. Do not use on aluminum