Linseed oil, protection and maintenance of wood and porous floors, 190 ml Onyx Bricolage reference C14051906.

Use Onyx Linseed Oil to protect and maintain outdoor wood and porous floors (tiles and many others).

It can also be used to protect against frost and humidity, soften various materials, restore the shine of wood and maintain linoleum.

Onyx Linseed Oil is a high-quality raw linseed oil, 100% from linseed, obtained by first cold pressing.

It can be used to maintain wood, unfinished tiles, terracotta tiles and flagstones, and to protect these different surfaces from damp and frost.

Onyx Linseed Oil can also be used to soften putties, oil-based paints and greasy coatings.

Also suitable for restoring the shine of varnished wood and maintaining linoleum.

Use: Dilute / Clean / Protect

Surface: Wood / Floor

Packaging: 190 mL

Texture : Liquid

OUR TIPS

Read the label and product information before use.

For wood, unfinished tiles, terracotta, tiles, terracotta and paving:
Mix 50 to 75% of ONYX linseed oil with ONYX pure gem turpentine + 1 to 2 tablespoons of ONYX driers per liter. Apply, then polish with a cloth. Linseed oil alone can be used, but drying time will be extended.

To maintain linoleum after washing:
Rub with a cloth soaked in siccatized linseed oil. Use ONYX siccative to accelerate drying of the linseed oil at a rate of one to two tablespoons of ONYX siccative per liter.

In all cases, carry out a preliminary test on an inconspicuous area to check compatibility with the substrate.
Do not dispose of residues down the drain or in the natural environment.
Caution: risk of spontaneous combustion. Soak rags in linseed oil before disposal.