Viewed products
Griffon 6309645
Avoid splashes: always make the surface to be cleaned operational first.
treat, then just spray. Turn the cap a quarter turn. Use
spray (open tab) for large surfaces and foam (open tab) for small surfaces
closed) for stubborn stains and hard-to-reach areas. Spray on the
from a distance of 3 to 5 cm and leave for 10 minutes.
On stubborn stains, repeat the treatment after 10 minutes. Clean the
surface treated thoroughly with a sponge and water. For joints
(e.g. silicone sealant), repeat the entire treatment
(spray and clean). After use, close the spray bottle by turning the
a quarter turn.
Stains/Residue: Stains cannot be removed.
Caution: Cover plants and metal. Do not use on
spackle. Avoid splashing on clothing (stains
(fading), on glossy paint (matting) and on laminates (discoloration). Can
cause a brownish discoloration of the light colored elastic joints and
delicate tiles. If in doubt, test before installation.
In case of skin contact, rinse immediately with water. The bottle cannot
Not to be reused. Do not use in combination with other products; gases
(chlorine) can be released.
Basic raw material: Sodium hypochlorite 50 g/l, percentage of
active chlorine about 5 %
Color: Light yellow
Viscosity: approx. Liquid
Density: approx. 1.09 g/cm³
pH value: approx. 13
Specifications: LEGAL REQUIREMENTS: Product version 2.
The application of this product is only permitted for the control of moulds
(black deposit) and algae (green deposit) in wet locations.
APPROVAL NO. 14011 N/8014 B Ready to use liquid / spray. Fungicide,
alguicide. Active ingredient: sodium hypochlorite (CAS 7681-52-9) 50g/l chlorine
active.
Shelf life of at least 12 months when the packaging is not
opened. Keep the package properly closed and upright in
in the dark and at a temperature of 20°C.
For immediate removal and suppression of mold and algae on
walls, floors and joints in sanitary areas, kitchens, cellars and storerooms
garages, etc... Also suitable for outdoor applications, such as
for facades and balconies. Suitable for treating large areas and
hard-to-reach places thanks to the unique combination of spray and
foam.
- With active foam & spray formula
- Effect in 10 minuten
Application conditions: Ventilate well during use.
Pre-treatment of surfaces: Do not remove mould and algae with
preliminary.
Warranty: For 6 to 8 m² of wall or 18 to 24 m of joints.
Aucun avis pour le moment.